Outline |
EMX7 |
EMX5 |
I/O |
Inputs |
TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE) |
TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE) |
Phantom power |
+48 V |
+48 V |
Outputs |
SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R] |
SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R] |
Control and others |
FOOT SWITCH : Effect Mute on/off |
FOOT SWITCH : Effect Mute on/off |
Bus |
Stereo: 1, AUX: 2 (Including FX) |
Stereo: 1, AUX: 2 (Including FX) |
Input Channel Function |
PAD |
30 dB (CH1-4) |
30 dB (CH1-4) |
Hi-Z |
Supported (CH4) |
Supported (CH4) |
HPF |
80 Hz, -12 dB/oct. (CH1–3) |
80 Hz, -12 dB/oct. (CH1–3) |
COMP |
1-knob COMP (CH1–4) |
1-knob COMP (CH1–4) |
EQ HIGH |
10 kHz +15 dB / -15 dB (Shelving) |
10 kHz +15 dB / -15 dB (Shelving) |
EQ MID |
2.5 kHz +15 dB / -15 dB (Peaking) |
2.5 kHz +15 dB / -15 dB (Peaking) |
EQ LOW |
100 Hz +15 dB / -15 dB (Shelving) |
100 Hz +15 dB / -15 dB (Shelving) |
On-board processors |
DSP |
SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor |
SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ |
On-board amplifiers |
Maximum output power @4ohms |
1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W |
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W |
Maximum output power @8ohms |
1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W |
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W |
Level Meter |
2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK) |
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK) |
General specifications |
EMX7 |
EMX5 |
Frequency response |
Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz |
Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz |
Total harmonic distortion |
Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF) |
Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF) |
Hum & noise level |
Equivalent input noise |
-117 dBu (Noise is measured with A-weighting filter) |
-117 dBu (Noise is measured with A-weighting filter) |
Residual output noise |
Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter) |
Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter) |
Crosstalk |
-85 dB (1 kHz, Measured with 1 kHz band pass filter) |
-85 dB (1 kHz, Measured with 1 kHz band pass filter) |
Protection circuit |
Load protection |
DC-fault |
DC-fault |
Amplifier protection |
Over heat protection, Over current protection, Integral power protection |
Over heat protection, Over current protection, Integral power protection |
Power supply protection |
Over heat protection, Over current protection |
Over heat protection, Over current protection |
Power requirements |
AC 100-240V, 50Hz/60Hz |
AC 100-240V, 50Hz/60Hz |
Power consumption |
45 W (Idle) / 250 W (1/8 Power) |
42 W (Idle) / 210 W (1/8 Power) |
Dimensions |
W |
465 mm (18 5/16") |
465 mm (18 5/16") |
H |
308 mm (12 1/8") |
308 mm (12 1/8") |
D |
325 mm (12 13/16") |
325 mm (12 13/16") |
Net weight |
9.5 kg (20.9 lbs) |
9.5 kg (20.9 lbs) |
Accessories |
Owner’s Manual, Technical Specifications, AC power cord (2.5 m) |
Owner’s Manual, Technical Specifications, AC power cord (2.5 m) |
Options |
Foot switch: FC5, Rack-mount brackets: RK-EMX7 |
Foot switch: FC5, Rack-mount brackets: RK-EMX7 |
Others |
Operating Temperature : 0 to +40℃ |
Operating Temperature : 0 to +40℃ |