Previous

Next

YAMAHA XMV4280-D

yamaha_xmv4280-d
120,000.00 THB ต่อหน่วย Manufacturer: YAMAHAYAMAHA

รายละเอียดย่อ :
เพาเวอร์แอมป์ 4x 280W at 8Ω/4Ω, 4x 250W at 100V/70V line, 2x 560W at Double Power Mode (8Ω/4Ω), YDIF digital, Dante models
 
รายละเอียดทั้งหมด :

YAMAHA XMV4280-D เพาเวอร์แอมป์ 4x 280W at 8Ω/4Ω, 4x 250W at 100V/70V

line, 2x 560W at Double Power Mode (8Ω/4Ω), YDIF digital, Dante models

XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.

  • 4x 280W at 8Ω/4Ω
  • 4x 250W at 100V/70V lines
  • 2x 560W at Double Power Mode (8Ω/4Ω)

Specs.

XMV4280, XMV4140, XMV4280-D, XMV4140-D

 

Model XMV4280 XMV4140 XMV4280-D XMV4140-D
Output Power 1kHz, THD+N = 1% 4Ω 280W x 4 140W x 4 280W x 4 140W x 4
8Ω 280W x 4 140W x 4 280W x 4 140W x 4
4Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
8Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
High impedance 100V line 250W x 4 / 40 Ω 125W x 4 / 80 Ω 250W x 4 / 40 Ω 125W x 4 / 80 Ω
70V line 250W x 4 / 20 Ω 125W x 4 / 40 Ω 250W x 4 / 20 Ω 125W x 4 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 28.7dB 31.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 31.7dB 34.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Input Sensitivity RL=8Ω +4dBu
S/N Ratio A-weighted ≥ 100dB
Power Consumption 1/8 power (4 Ω pink noise) 250W 150W 250W 150W
Idle (4 Ω) 37W 37W 37W 37W
Standby 18.5W 18.5W 18.5W 18.5W
THD+N 1kHz, half power ≤ 0.2%
Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz 0dB, ±1.0dB
Crosstalk 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt ≤ -60dB
Maximum Input Level +24dBu
Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
Connectors Analog Input Euroblock x 2 (6P, balanced)
Digital Input / Output RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker Output Barrier strip x 4 pairs
Network RJ45 x 1 Shared with Dante ports
Remote, Fault Output Euroblock (3P) x 1
AC IN AC Inlet x 1
Protection circuit Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), 
Low load impedance: Output mute (Restored automatically)
Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , 
Integrated power: Gain reduction (Restored automatically)
Cooling Fan 3-Speed fan x 2, front-to-back airflow
Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9")
H 88mm (3.5")
D 422mm (16.6")
Weight 8.1kg (17.9lbs)