Audio-technica U857QL

audio-technica_u857ql
audio-technica_u857qlaudio-technica_u857ql_2
10,200.00 THB ต่อหน่วย Manufacturer: Audio-TechnicaAudio-Technica

รายละเอียดย่อ :
ไมโครโฟนแบบก้าน Cardioid Condenser Quick-Mount Gooseneck Microphone
 
รายละเอียดทั้งหมด :

Audio-technica U857QL ไมโครโฟนแบบก้าน Cardioid Condenser Quick-Mount Gooseneck Microphone

 

 
 
U857QL
Cardioid Condenser Quick-Mount Gooseneck Microphone
   
 
 
 
 
The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard™ innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine™ line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
  • Designed for high-quality sound reinforcement, professional recording and broadcasting
     
  • Superior off-axis rejection for maximum gain before feedback
     
  • UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
     
  • Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
     
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
     
  • Self-contained electronics eliminate need for external power module
     
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
     
  • Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
     
  • Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
     
  • Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
 

 SPECIFICATIONS

 
ELEMENT Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN Cardioid 

FREQUENCY RESPONSE 30-20,000 Hz

LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
 
OPEN CIRCUIT SENSITIVITY –39 dB (11.2 mV) re 1V at 1 Pa

IMPEDANCE 250 ohms 
 
MAXIMUM INPUT SOUND LEVEL 139 dB SPL, 1 kHz at 1% T.H.D.
 
DYNAMIC RANGE (typical) 115 dB, 1 kHz at Max SPL
 
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
 
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
 
 
BATTERY TYPE na
 
BATTERY CURRENT / LIFE na
 
 
SWITCH Flat, roll-off
 

WEIGHT

5.3 oz (150 g)
 

 
DIMENSIONS
 
18.94" (481.0 mm) long, 
0.48" (12.2 mm) head diameter, 
0.74" (18.9 mm) base diameter
 

OUTPUT CONNECTOR Integral 3-pin XLRM-type
 
CABLE na
 
ACCESSORIES FURNISHED AT8153 two-stage foam windscreen; AT8662 shock mount
 
OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°); 
UE-O omnidirectional (360°); 
UE-UL UniLine™ (90°)
 
AUDIO-TECHNICA CASE STYLE M34
 



SPECIFICATIONS GRAPHS

 
Click on the chart to view the larger image
POLAR PATTERN
FREQUENCY RESPONSE
   

 

CONDITIONS

Specifications and product details are subject to change without notice. 

Definitions/explanations for technical terms will be found in a large Glossary on this site. Links have not been included within the text on most pages, to keep them as readable as possible; but a Glossary button appears in the Navigation Bar at the top of each page.

Microphone Conditions (Additional comments)


Open Circuit Sensitivity At 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts. 

Noise, typical A-weighted, using Audio Precision System One measurement system. 

Weight Stated for the microphone only, without accessories, and without attached cable/power module, if applicable. 

Frequency Response (Graph) Shows mic output versus frequency with a constant sound input level from a source 0.5 meters from the diaphragm. Each vertical division in the graph is 10dB. A dashed line, if present, shows the effect of a low-roll-off (hi-pass) function. 

Polar Pattern (Graph) Shows mic output versus angular direction of the sound source, with a constant sound input level at 1 kHz, at a constant distance from the diaphragm. Zero degrees (0°) is the "front" of the mic. Each circular division in the graph is 5 dB, beginning from the 0° point and counting inward. 

Additional Information Profile pages for some products provide links to additional information, such as further specifications, operating instructions, product reviews, etc. These may be in various forms, such as text, graphics and pdf files. 

Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest. 


Headphone/Headset Conditions (Additional comments)


Headphone Sensitivity Input of 1 milliwatt at 1 kHz into rated impedance; output in dB SPL, using a Brüel & Kjaer 4153 coupler. 

Maximum Input Power At 1 kHz into rated impedance. 

Boom Mic Sensitivity Open circuit, at 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts. 

Additional Information Profile pages for some products provide links to additional information, such as further specifications, operating instructions, product reviews, etc. These may be in various forms, such as text, graphics and pdf files. 

Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest.