Previous

Next

Audio-technica BP4025

audio-technica_bp4025
23,500.00 THB ต่อหน่วย Manufacturer: Audio-TechnicaAudio-Technica

รายละเอียดย่อ :
X/Y Stereo Field Recording Microphone
 
รายละเอียดทั้งหมด :

Audio-technica BP4025 X/Y Stereo Field Recording Microphone

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

  • Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
  • Innovative coincident capsule configuration produces accurate stereo image in smaller housing
  • Compact, lightweight design is ideal for camera-mount use
  • Excellent channel separation
  • Phantom power operation - for use with professional equipment
  • Switchable low-frequency roll-off and 10 dB pad
  • Includes one balanced cable (two 3-pin XLRM-type connectors at output)
  • RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Specs.

  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: X/Y Stereo
  • Frequency Response: 20-17,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
  • Channel Balance: 
  • Impedance: 170 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 131 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 80 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 7 mA typical (both channels total)
  • Switch: Flat, roll-off; 10 dB pad (nominal)
  • Weight: 269 g (9.5 oz)
  • Dimensions: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
  • Output Connector: Integral 5-pin XLRM-type
  • Cable: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
  • Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch