Audio-technica U857RU

Audio-technica U857RU UniLine® Condenser Adapter-mount Gooseneck

Microphone

Featuring Audio-Technica's UniLine line-cardioid element, the U857RU adapter-mount gooseneck condenser microphone has a small-diameter gooseneck with virtually no 'memory'. Its ultra-flexible, robust design permits easy adjustment into desired shape while resisting inadvertent repositioning. The microphone direct mounts to any 5/8"-27 stand; it is 16.81" long. Equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference, the U857RU accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.

• Designed for high-quality sound reinforcement, professional recording and broadcasting
• UniLine® polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Easy-to-adjust, rugged, small-diameter, alternating gooseneckwith virtually no 'memory' permits quick positioning into desired shape
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
• Direct mounts to any 5/8"-27 stand, or to included threaded mounting flange

Specs.

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Line Cardioid
• Frequency Response: 30-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 18 dB/octave
• Open Circuit Sensitivity: 35 dB (17.7 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 135 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 115 dB, 1 kHz at Max SPL
• Signal to Noise Ratio: 74 dB, 1 kHz at 1 Pa
• Phantom Power Requiremens: 11-52V DC, 2 mA typical
• Switch: Flat, roll-off
• Weight: 5.0 oz (141 g)
• Cable: 9.8' (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor,shielded cable with TA3F-type connector
• Accessories: AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8154 two-stage foam windscreen