Previous

Next

Audio-technica ES947

audio-technica_es947_1196796421
9,100.00 THB ต่อหน่วย Manufacturer: Audio-TechnicaAudio-Technica

รายละเอียดย่อ :
Cardioid Condenser Boundary Microphone

*สินค้าBy order 30-45วันครับ*
 
รายละเอียดทั้งหมด :

Audio-technica ES947 Cardioid Condenser Boundary Microphone

This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: black (ES947) and white (ES947W).

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Available in two colors: black (ES947) and white (ES947W)
  • RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Specs.

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (Cardioid in hemisphere above mounting surface)
  • Frequency Response: 40-12,000 Hz
  • Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 113 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Weight: 64 g (2.3 oz)
  • Dimensions: 69.0 mm (2.72") long, 30.0 mm (1.18") diameter
  • Output Connector: Integral 3-pin XLRM-type