Previous

Next

QSC AD-S10T-BK/WH

ad-s10t-bk
28,200.00 THB ต่อหน่วย Manufacturer: QSCQSC

รายละเอียดย่อ :
ตู้ลำโพง 70/100V, 10-inch, two-way, full-range systems
 
รายละเอียดทั้งหมด :
 

QSC AD-S10T-BK/WH ตู้ลำโพง 70/100V, 10-inch, two-way, full-range systems

QSC’s AcousticDesign™ S10T surface mount loudspeakers are professional, 70/100V, 10-inch, two-way, full-range systems ideal for a wide variety of foreground and background sound reinforcement applications. Ease-of-installation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers. Innovations found on AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.

Housed in rugged ABS enclosures for long-term durability, S10T loudspeakers employ DMT™ (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4in diaphragm, 1-in exit compression driver on the S10T delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers offer premium performance on 70/100V distributed audio lines.

Installers will appreciate flexible mounting options. Euroblock connectors allow pre-wiring of the system and the included 

X-Mount hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. Moreover, the loudspeaker can attach to its mount on any plane to facilitate multiple deployment configurations. 

AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle.  S10T models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket.

S10T loudspeakers meet IEC60529 IP-54 for dust and splash resistance and feature sealed input panels and powder coated aluminum grilles for added weather resistance.

Presenting a clean, unobtrusive look, AD-S grilles are unadorned eliminating the need to cover obtrusive logo treatments. AD-S loudspeakers are available in either black (RAL 9011) or white (RAL 9010) and may be painted to match any décor.

 

To minimize impact and disposal fees at the job site, all AD-S loudspeakers are packaged in environmentally friendly, recyclable cartons.

Feature.

• DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
• Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
• Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
• Euroblock connectors allows pre-wiring of the system
• Low saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only)
• Lightweight ABS enclosures offer long-term durability and lasting good looks
• Sealed input panel cover and powder coated aluminum grilles for added weather resistance
• Meets IEC60529 IP-54 for dust and splash resistance
• Available in black (RAL 9011) or white (RAL 9010)
• Complete EASE, CAD & BIM information available online

Specs.

 

System Details AD-S8T AD-S10T AD-S12
Effective frequency range1 55 – 20k Hz 50 – 19k Hz 52 – 20k Hz
Rated noise power / voltage2 200 watts / 40 volts (rms) 250 watts / 45 volts (rms) 300 watts / 50 volts (rms)
Broad-band sensitivity3 90 dB SPL 92 dB SPL 95 dB SPL
Coverage angle (-6 dB) 105° 90° 75°
Directivity factor (Q) 7 10 12
Directivity Index 9 dB 10 dB 11 dB
Maximum continuous SPL4 113 dB 116 dB 120 dB
Maximum peak SPL4 119 dB 122 dB 126 dB
Rated impedance 8 ohms 8 ohms 8 ohms
Recommended amplifier power 400 watts 500 watts 600 watts
Transformer taps 70 V: 60, 30, 15, 7.5 watts and 8 ohm bypass 70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass 70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass
100V: 60, 30, 15 watts and 8 ohm bypass 100V: 100, 50, 25 and 8 ohm bypass 100V: 100, 50, 25 and 8 ohm bypass
HF transducer 1” exit / 1.4” voice-coil compression driver 1” exit / 1.4” voice-coil compression driver 1” exit / 1.4” voice-coil compression driver
LF transducer 8” weather resistant paper cone woofer, 10” weather resistant paper cone woofer, 12” weather resistant paper cone woofer, 3” / 76 mm voice-coil
2” / 51mm voice-coil 2.5” / 64 mm voice-coil  
Input connector type Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals
Enclosure material Painted ABS polymer Painted ABS polymer Painted ABS polymer
Grille material Powder coated aluminum Powder coated aluminum Powder coated aluminum
Enclosure Details      
Ingress protection IP-54 IP-54 IP-54
Operating environment Designed for indoor and outdoor use Designed for indoor and outdoor use Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests: The AD Series loudspeakers qualified for outdoor use using the following tests: The AD Series loudspeakers qualified for outdoor use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature:  tested according to QSC internal standards between -20° and 50° C High and low temperature:  tested according to QSC internal standards between -20° and 50° C High and low temperature:  tested according to QSC internal standards between -20° and 50° C
Operating Temperature Range -20 to 50 °C  / -4 to 122 °F -20 to 50 °C  / -4 to 122 °F -20 to 50 °C  / -4 to 122 °F
Net weight 24.1 lbs / 11 kg 31 lbs / 15 kg 35.2 lbs / 16 kg
Product dimensions 17.3” x 10” x 9.9” (440 x 254 x 251mm) 20.3” x 12.5” x 11.7” (516 x 318 x 298mm) 23.4” x 13.9” x 12.7” (594 x 354 x 323 mm)
Shipping weight 32.1 lbs / 14.5 kg 40.6 lbs / 18.45 kg 46.3 lbs / 21 kg
Shipping dimensions 24.3 x 13.8” X 13.8” (729 x 351 x 351mm) 31.7” x 16.1” X 16.1” (805 x 409 x 409mm) 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm)
Included accessories X-Mount mounting system, euroblock connector, input panel cover X-Mount mounting system, euroblock connector, Input panel cover X-Mount mounting system, euroblock connector, Input panel cover
Optional accessories YMS8T yoke mount, M10 Kit-C YMS10T yoke mount, M10 Kit-C YMS12 yoke mount, M10 Kit-C