Audio-technica AT4041SP Studio Microphone Pack
The AT4041 outperforms mics twice its price! Its warm, delicate, sweet sound makes recordings spring to life. It's ideal for drum overheads, acoustic guitar, piano, horns and under snares. The AT4041 Studio Pack offers two AT4041 studio mics with a pair of stand clams, two windscreens, and a protective vinyl storage case.
This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Features:
- Recommended for professional recording and critical applications in broadcast
- Smooth, extended frequency response, high output and very high SPL capability
- Transformerless design for low self-noise
- Switchable highpass filter and rugged turned-brass microphone housing
- Frequency response 20Hz-20kHz
- 100 ohms impedance
- Element - fixed-charge, permanently polarized capacitor
- Polar Pattern - cardioid
- Dynamic range, typical - 121dB, 1kHz at max SPL
- Signal-to-noise ratio, typical - 70dB
- Phantom Powered - 48-volt DC
- Two AT4041 cardioid condenser microphones
- Two AT8405a stand clamps
- Two AT8159 windscreens
- Protective vinyl case
Specification |
Detail |
Microphone Type |
Condenser |
Polar Pattern |
Cardioid |
Frequency Response |
20Hz-20kHz |
Max SPL |
145dB SPL (1kHz at 1% THD) |
Output Impedance |
100 ohms |
Signal to Noise Ratio |
70dB, 1kHz at 1 Pa |
Low Cut Filter |
80Hz, -12dB/octave |
Pads |
No Pad |
Connector |
XLR |
Weight |
.26 lb. |
Manufacturer Part Number |
AT4041SP |
|
|