Audio-technica U871UG

Audio-technica U871UG Unidirectional Condenser Boundary Microphone

• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations.
• UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequency interference(RFI).
• Superior off-axis rejection for maximum gain before feedback.
• Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance.
• Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone.
• Low-profile design with low-reflectance finish for minimum visibility.
• AT871UG has contained electronics eliminate need for external power module.
• The AT871UG requires 9V to 52V phantom power for operation only.

• Specifications

  Element	Fixed-charge back plate, permanently polarized condenser
  Polar Pattern	Half-cardioid (cardioid in hemisphere above mounting surface)
  Frequency Response	30-20,000 Hz
  Open Circuit Sensitivity	-34 dB(19.9mV) re 1V at 1Pa
  Impedance	200 ohms
  Maximum Input Sound Level	133 dB SPL (1KHz,THD 1%)
  Dynamic Range (Typical)	103 dB, 1 kHz at Max SPL
  Signal-To-Noise Ratio	67 dB, 1 kHz at 1Pa
  Phantom Power Requirements	415 g
  Dimensions	17.0mm x 145.0mm x 120.0mm (H x W x D)
  Angle	120°
  Cable	7.6m long, 3.2mm diameter, 2-conductor shielded cable with TA3F-type connector and XLRM-type connectors.
  Accessories Furnished	Soft protective pouch