TANNOY VQ85DF-BK

tannoy_vq85df-bk
tannoy_vq85df-bktannoy_vq85df-bk2tannoy_vq85df-bk3tannoy_vq85df-bk4
146,100.00 THB ต่อหน่วย Manufacturer: TANNOYTANNOY

รายละเอียดย่อ :
TANNOY VQ85DF Line Array Speaker

- ลำโพงแขวน ไลน์อาร์เรย์
- การตอบสนองย่านความถี่ 350Hz - 27kHz
รายละเอียด :

TANNOY VQ85DF-BK Line Array Speaker ลำโพงแขวน ไลน์อาร์เรย์

Features :

The VQ 85DF (Down Firing) is a dedicated two way down-firing Mid/High loudspeaker designed to seamlessly integrate with the VQ full range and VQ MB loudspeakers matching their exact footprint. The down firing configuration allows the VQ 85DF to be tight packed without the need for any complex fly-ware. With a coverage pattern of 80 x 50 degrees, the VQ 85DF will provide even coverage to the areas immediately below the main flown loudspeakers. For full range use the VQ 85DF can also be used along with the VQ MB. 

The VQ 85DF can be configured for use in Single or Bi-Amp mode, in conjunction with a suitable digital signal processor (DSP).

The modular design approach allows the sound system designer to create seamless and predictable arrays, or they can be used singly as part of large distributed systems. VQ 85DF addresses the requirement for compact dimensions without compromising performance in any way.

VQ MH elements which are available in various patterns will integrate seamlessly with the VQ 85DF enclosures to facilitate tight pack arrays; the compound angles on the enclosure avoid unsightly spaces between separate cabinets when arrayed horizontally. VQ MB or VS 15DR elements can be added to extend bandwidth and pattern control to lower frequencies. 

The VQ 85DF incorporates a unique driver technology to radiate a coherent single point source for superior dispersion control when coupled to a PSW™ (Point Source Waveguide). This advanced design aligns the acoustical centres of the transducers providing a single coherent wavefront emanating from the throat. The PSW™ waveguide achieves an optimum balance of extremely well controlled coverage, smooth frequency response, and natural sound character. 

For outdoor applications, weather resistant enclosures which incorporate stainless steel hardware are available.

Applications :

  • 134 dB Maximum SPL (Average) 
  • Tightly controlled 80 x 50 degree dispersion 
  • Patented PSW™ Waveguide technology for class-leading directivity
  • High performance 2-way Mid-High down-firing device
  • Modular design for down-fill on larger clusters
  • Excellent Phase Coherence
  • Perfect time alignment without the associated problems of multi source interference
  • Compact Dimensions
  • Extremely high sensitivity, therefore high SPL’s can be achieved with a very modest amount of amplifier power
  • Exceptional transient response

Specifications :

PERFORMANCE
System Type 2-Way Mid/High - Point Source
Frequency Response (-3dB) 1 400Hz - 23kHz
Frequency Range (-10dB) 1 350Hz - 27kHz
Operating Modes Single Amplified
Bi-Amp (MF,HF)    User Configurable
System Sensitivity & Operating Freq. (1W @1m) 2 
SINGLE AMPLIFIED
Passive MF/HF (450Hz - 23kHz) 110dB (2.83V @ 8ohms)
BI-AMP
MF (450Hz - 7kHz) 110dB (2.83V @ 8ohms)
HF (7kHz - 23kHz) 110dB (2.83V @ 8ohms)
Dispersion H x V (-6dB) 80 x 50 degrees
DRIVER COMPLEMENT
MF/HF Dual Concentric™ Compression driver loaded into a single PSW™ Waveguide
Crossover Frequency Single Amplified - 7kHz (passive)
Bi-amp  7kHz (active)
Recommended HighPass Filter @ 450Hz
Directivity Factor (Q) 13.4 averaged 1kHz to 10kHz
Directivity Index (DI) 11.3 averaged 1kHz to 10kHz
RATED MAXIMUM SPL 2
MF 134dB (average) 140dB (peak)
HF 133dB (average) 139dB (peak)
Passive MF/HF 134dB (average) 140dB (peak)
Power Handling 3     Average             Programme         
MF @ 8ohms 200W (40V)      400W      
HF @ 8ohms 90W (27V)        180W      
Passive MF/HF @ 8 ohms 200W (40V)      400W      
RECOMMENDED AMPLIFIER POWER
MF 400W into 8ohms
HF 200W into 8ohms
Passive MF/HF 400W into 8ohms
NOMINAL IMPEDANCE
MF 8ohms (6.5 ohms Minimum)
HF 8ohms (8.5 ohms Minimum)
CONSTRUCTION
Enclosure 18mm (0.71") birch plywood.
Finish Textured black or white paint 
(custom colours on request).
Powder coated perforated steel grille
Connectors Barrier Strip & Speakon connector
Fittings 2 x Recessed carrying handles
9 x M10 flying inserts
Dimensions (H x W X D) 500mm x 694mm x 515mm
19.69" x 27.32" x 20.28"
Weight 28kg
Notes
1. Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
2. Unweighted pink noise input, measured at 3 metres in an anechoic chamber, then referred to 1 metre
3. Accelerated Life Test (EIA RS426-B)A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com

Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notification